Senin, Desember 17, 2012

Berlangganan

Code Blinking And Error Code Printer Canon

arti kode blinking dan error printer canon

Error Code Canon IP1300, IP1700, IP1200, IP1880, IP1980 :

3x orange 1x green = mechanical error
4x orange 1x green = absorber full /reset with general tools
5x orange 1x green= cartirdge black/colour has problem
7x orange 1x green = cartirdge black/colour has problem
8x orange 1xgreen = absorber full / reset with general tools
12x / 15x orange 1x green = cartridge detection

Code Blinking Canon :

1.Blingking 2x = Out of Paper or Paper feed error
2.Blingking 3x = Paper Jam
3.Blingking 4x = Ink cartridge was out
4.Blingking 5x = Cartridge unknown
5.Blingking 7x = Position of the Cartridge is not right
6.Blingking 8x = Ink absorber full
7.Blingking 14x = Cartridge unknown

Canon MP Error Code error :

E2-2    = No paper
E3-3    = Paper jam
E4      = No ink  - 
E5-5    = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the                     ink cartridges are not installed properly
E8      = Waste ink absorber full, or platen waste ink absorber full
E9      = The connected digital camera / video camera does not support Camera Direct Printing
E14     = The Ink cartridges whose destination are wrong
E15     = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19     = Failed to scan head alignment sheet
E22     = Carriage error
E23     = Paper feed error
E24     = Purge unit error
E25     = ASF(cam) sensor error
E26     = Internal temperature rise error
E27     = Waste ink absorber full or platen waste ink absorber full
E28     = Ink cartridge temperature rise error -
E29     = EEPROM error
E33     = Paper feed position error
E35 15     = USB Host VBUD overcurrent error – USB
E37 17     = Abnormal motor driver error
E40 20     = Other hardware error
E42 22     = Scanner error

7x orange 1x green = Problem: Black or Color cartridge trouble.
8x orange 1x green = Problem:  printer absorber full (Waste Ink Pad Full)
Solution: Reset the printer using generaltools or software Resetter. If not work

Tidak ada komentar:

Posting Komentar